Part Modeling
Everything SphereHarness can build in a part — sketches, solid and surface features, patterns, sheet metal, materials, measurement and export — with prompts you can type as-is. All values are millimetres and degrees unless you say otherwise.
Start here: a worked bracket
If you read nothing else, read this. It is the shape of a session that goes well: one feature at a time, each one checked before the next.
-
Create a new part, then a 120 x 80 x 15 mm plate — sketch on the XY plane and extrude 15 mm in +Z
Expected volume 144,000 mm³.
-
What is the volume and bounding box?
Confirm 144,000 mm³ and 120 × 80 × 15 before continuing.
-
Add four Ø9 mm through holes on the top face, 15 mm in from each corner
Four holes through 15 mm of plate remove about 3,817 mm³.
-
How many holes are in the tree, and what is the volume now?
-
Add 5 mm fillets to the four vertical corner edges
-
Assign 6061-T6 aluminium and tell me the mass
Sketching
Choosing the sketch plane — the single most important thing on this page
A sketch can go on a standard plane (XY, XZ, YZ), on an existing face, or on any plane in space defined by a point and a normal direction. For anything that is not on a standard plane through the origin, use the third form and say both parts out loud:
To sketch on a face, get the face from a query first rather than guessing at a name:
Sketch entities
Lines, circles, arcs, rectangles, regular polygons, points, ellipses and splines are all available, plus arbitrary closed polygons given as a list of vertices.
A regular polygon is given by its circumscribed radius (corner distance). For a size across the flats, divide by cos(180°/n) first — 24 mm across flats is a 13.86 mm radius for a hexagon.
Arcs: give the exact angles if you have them
An arc is defined by centre, radius, start angle and end angle. If you know the exact angles, paste them — rounding a computed angle by half a degree can leave a profile open by a fraction of a millimetre, and an open profile will not extrude.
Constraints and dimensions
Coincident, concentric, parallel, perpendicular, horizontal, vertical, tangent, equal and fix constraints can all be added, along with linear, radial, diameter and angular sketch dimensions.
Editing sketches
Sketch entities are moved by their dimensions — there is no free “move this circle” operation.
Solid features
Extrude and cut
Give the direction as a world axis rather than “positive” or “negative”. Positive means different things on different planes and in different CAD systems; +Z does not. The extrusion runs along the sketch normal — the axis you give picks the side, it does not tilt the extrusion.
If a cut reports success but the volume did not change, the direction was wrong. Say so and ask for the flip:
Revolve
An axis named simply “X” passes through the world origin. For an axis anywhere else, give two points on the axis (or a sketch line to revolve about) — this is the most common cause of a revolve that produces a giant ring instead of a shaft.
Sweep and loft
A helix is built as a coil (round wire), not as a “helical sweep” — a sweep told to be helical is refused by name.
Lofts accept an end condition at each end of free or normal to profile; a tangent or direction condition is refused by name rather than ignored. Guide curves and a closed loop depend on the CAD system — check the volume after a guided loft, and a closed loft is refused on Solid Edge.
Fillets — identify edges by world point
This is the technique that makes fillets reliable. Give one world-coordinate point near the midpoint of each edge you want blended, in millimetres. Each point selects exactly the nearest body edge; nothing else is filleted.
Where do you get the points? Ask for them:
Descriptive selection also works for the easy cases — and is fine when the geometry is unambiguous:
Reading a fillet result
- Per-edge evidence — each edge's type, midpoint, length, and the distance from the point you gave. A distance of 0.00 mm means a dead-on pick.
- Measured volume change. A fillet on a convex edge removes material; on a concave edge it adds. Zero change means nothing happened.
- Refusals name the real geometry. If your point is more than about 3 mm from any edge, or two edges are within half a millimetre of being equally close, the operation stops and tells you the candidates and their actual coordinates — which is exactly what you need to correct the request.
Chamfers
Holes and threads
Hole types: simple, counterbore, countersink and tapped. A tapped hole is the tap-drill bore with a cosmetic thread — the thread is in the hole's data and on drawings, not cut into the solid, so the volume equals a plain tap-drill hole. A modelled (geometric) thread is available on NX; on Inventor and Solid Edge a modelled thread is refused by name. Target a face either by asking for the face from a query, or by naming its outward normal as a world axis — x, -x, y, -y, z, -z.
Threads can also be added to an existing hole or shaft (modelled on NX, cosmetic on Inventor, not available on Solid Edge). Leave the diameter out and the thread is derived from the hole's actual measured geometry, which is more reliable than typing a size that may not match:
Shell, draft, boolean, split
Face-level edits
Reference geometry
Editing existing features
You never have to delete and rebuild to change a value. Refer to the feature by name and say what should change.
Patterns and mirrors
Parameters and equations
Named parameters and driving equations can be listed, read, created, changed and exchanged as JSON — in all four 3D CAD systems, using each one's own mechanism.
Materials, appearance and properties
Colour goes on the part, a body or individual faces — a feature is coloured by naming its faces.
Measuring and querying
Measurement is how you check everything else on this page, so it is worth knowing what is available.
Verification prompts
And the probe technique, for when volume alone cannot tell you where something is:
The volume removed tells you how much material genuinely exists in that height band — which a total volume never can. See Verifying results.
Checkpoints
Sheet metal
Sheet metal is supported in all four 3D CAD systems (not AutoCAD). The first feature of a sheet metal part must be a base flange — not an extrusion — because that is what establishes the thickness, bend radius and the sheet body that everything else depends on.
Nesting for cutting
How this runs depends on your CAD system:
In every CAD system the layout is done by SphereHarness's own nesting engine from each part's exported flat-pattern DXF — the same result whichever CAD the parts come from. The CAD's own nesting tools (Inventor Nesting Utility, Solid Edge Nest) are not used. On NX, create the flat pattern of each part first.
Surfaces
Surface modelling is more unevenly supported than solid modelling, so check this table before planning a workflow around it.
| Operation | Inventor | NX | Solid Edge |
|---|---|---|---|
| Offset surface | Yes | Yes | Yes |
| Extend surface | Yes | Yes | Yes |
| Trim surface | Yes | Yes | Yes |
| Thicken surface into a solid | Yes | Yes | Yes |
| Planar surface from boundary curves | Yes | Yes | Yes |
| Project a curve onto a planar face | Yes | Yes | Body edges only |
Design for manufacture
SphereHarness can score a part against manufacturing rules and write the result up as a Word document, with screenshots.
Domains: machining, sheet metal, injection moulding, casting, 3D printing and welding, or let SphereHarness infer the domain from the part.
Mould tooling
Draft analysis, parting lines, parting and shutoff surfaces, core/cavity split, mould bases, runners and cooling channels are available — but with real differences between CAD systems.
| Operation | Inventor | NX | Solid Edge |
|---|---|---|---|
| Draft angle analysis | Yes | Yes | Yes |
| Parting line | Yes | Yes | Yes |
| Parting surface | Yes | Yes | Yes (planar) |
| Shutoff surface | Yes — you name the opening faces | Yes | Yes |
| Core / cavity split | Yes | Yes | Yes |
| Mould base (plates), runners, cooling channels | Yes — plain plates; a catalogue standard and the cavity count are not applied | Yes — plain plates; standard and cavity count not applied | Yes |
Import and export
STEP, IGES and STL are available for solids in every 3D CAD system; Parasolid on Solid Edge; SAT and JT on Inventor and Solid Edge. PDF, DXF and DWG for drawings. To move a part with its feature history instead of as a dumb solid, see Feature Tree Translation.
Known gaps worth knowing about
Not available in any CAD system: CAM setup / toolpath generation — refused by name. Projecting a curve works onto a planar face only (see the surfaces table).
Face divide, face delete and face replace work in all four CAD systems; verify with a face count and a volume before building on the result, as with any edit.
See also
- Chat Basics — the habits this page assumes.
- Drawings & Dimensions
- Assemblies
- Simulation & FEA
- Verifying results